Rope Wrench PPE Regulations Kit

The Rope Wrench provides an ‘S’ bend in the rope above the hitch cord.  This effectively provides a contained double rope system, on a single rope, which shares the user’s weight between the Wrench and the hitch.  This allows the operation of the hitch, without the need for a double-rope system. The Rope Wrench allows easy horizontally movement, with greatly reduced friction on re-directs (compared with DdRT).

The Rope Wrench system has been third-party tested and certified by a Notified Body, to PPE ‘Regulation 2016/425′, allowing users to climb in compliance with the latest European best practice regulations.

IMPORTANT, PLEASE NOTE:

The PPE Regulations Certification applies to full kits, when used in their entirety.

KT282A1.2-BS-DL Kit Contents:
[1] Rope Wrench, fitted with Twin-leg Tether
[1] PHLOTICH Hitch-minding Pulley (Bushed)
[1] Aluminium HMS Karabiner (Supersafe Triple-lock Gate[1] Teufelberger OP 85cm e2e Hitch (10mm)
PLEASE NOTE:  For compliance labeling reasons, Hitch Cords must be sourced from ISC (via your ISC Retailer).   Hitch cords which are purchased through the Teufelberger supply network do not bear the required labeling, for compliance with the Rope Wrench PPE Regulation Approved kits.

Technical Information

Rope diameter range (mm) 11.8
Serial numbering As standard
EZYiD Available on request
Gate/lock type Supersafe
Body finish Anodised

Approved Standards

CE PPE Regulation 2016/425.

In order to be complaint, the prescribed kit MUST be used in its entirety and with the hitch cord tied in a 5-wrap Distel configuration.